technical parameter
-
Displacement (L)
1.598
-
Bore x Stroke (mm)
77 x 85.8
-
Compression Ratio
9.9:1
-
Max. Net Power /Speed (kW/rpm)
140/5500
-
Max. Net Torque /Speed (Nm/rpm)
275/2000 – 4000
-
Specific Power (kW/L)
87.6
-
Dimension (mm)
605 x 632 x 652
-
Weight (kg)
125
-
Emission
CN6
External characteristic curve
01
Key Technologies
Chery iHEC (Intelligent And Efficient) Combustion System, Variable Valve Timing -Dvvt, Electronic Clutch Water Pump -Swp, TGDI, Variable Oil Pump, Electronic Thermostat, IEM Cylinder Head And Other Key Technologies.
02
Extreme Performance
The extreme power performance, with a power rise of 90.7kw/L, is in a dominant position among the joint venture competitors. The peak torque is 181nm/L, and the 100 km acceleration time of the whole vehicle is only 8.8s, which is in a leading position among the models of the same level
03
Energy Saving and Environmental Protection
Excellent economy and emission performance meet the emission requirements of national VI B. at the same time, the comprehensive fuel consumption on the EXCEED LX model is less than 6.9L.
04
Reliability and Durability
The testbed verification has accumulated more than 20000 hours, and vehicle verification has accumulated more than 3million kilometers. The development footprint of vehicle environmental adaptability is all over the world in extreme environments.
F4J16
As Chery's third generation engine, F4J16 turbocharged direct injection engine developed by Chery ACTECO’s new platform. This engines model has a very superior performance in terms of dynamic parameters, including Chery iHEC (intelligent) combustion system, rapid temperature rise thermal management system, fast response supercharging technology, friction reduction technology, lightweight technology, etc.
F4J16
Among them, the key technology is Chery iHEC combustion system, which adopts the side cylinder direct injection, cylinder head integrated exhaust manifold and 200bar high-pressure injection technology, which is easier to produce tumble.
F4J16
The maximum power is 190 horsepower, the peak torque is 275nm, and the thermal efficiency reaches 37.1%. At the same time, it can also meet the emission standards of national VI B. This engine model is applied to the current models of TIGGO 8 and TIGGO 8plus series.
F4J16
Chery's third-generation ACTECO 1.6TGDI engine applies high-pressure cast all aluminum alloy cylinder block in terms of new materials. At the same time, a large number of new technologies such as modular integrated design and structural topology optimization are adopted, which makes the engine weight with 125kg, and further improves its fuel economy while bringing a more excellent power experience.
